West Africa

Electrical equipment — Niger

For a Niger project, power requirements and site access should be defined together. T Afrik Energy supports enquiries for transformation, distribution and motor supplies serving industrial and pumping installations. The applications listed are illustrative examples.

Illustrative outdoor substation with a distribution transformer
Representative photograph · T Afrik Energy Solutions

Documented voltage levels

20 / 33 kV

Network counterpart

NIGELEC — Société nigérienne d’électricité

Networks and equipment class selection

ARSE’s compilation updated in May 2024 describes NIGELEC distribution feeders mainly at 20 and 33 kV phase-to-phase. This definition does not replace specific feeder data or exclude particular configurations. For pumping or industrial connections, confirm the delivery level, capacity and protection requirements. Cable length, motor starting methods and changing loads may affect sizing. Also specify site temperature, dust exposure and backup arrangements where an interruption would affect the process or service. Equipment selection should follow these actual inputs rather than a country-wide voltage assumption.

[1]

Network voltage and equipment rating are different

The reference catalogue includes AIS and RMU classes 12, 24 and 36 kV, and AIS up to 40.5 kV. For nominal 30 or 33 kV networks, examine the 36 kV option against maximum voltage, insulation, current and fault constraints. A 24 kV class does not cover a nominal 30 kV network; 36 kV does not cover 66 kV. Cable U0/U/Um markings require separate validation.

Equipment

Ports, transit and the final site route

Niger is landlocked, so a maritime import requires a transit corridor and a final route to site. The World Bank’s May 2025 Lomé–Ouagadougou–Niamey document links the Port of Lomé to Niger through Burkina Faso. This supports assessment of a transport option, with crossing conditions checked for the shipment. A location beyond Niamey requires a separate review of the final journey. Unit weights, dimensions and unloading capabilities should be known before transport arrangements are selected, particularly for a transformer or a compact substation.

[1]

Equipment to examine for your project

Configurations are adapted from the Imperium catalogue verified for this version. Confirm the actual reference, documents and availability in the offer; local approval is not automatic.

Illustrative lineup of air-insulated medium-voltage switchgear
· T Afrik Energy Solutions

Documented range

Air-insulated MV switchgear

Incomers, feeders and transformer protection: define board functions and configuration.

Published rated voltages: 12 / 24 / 36 / 40.5 kV.

Consultation requirements and documents

State whether equipment serves a NIGELEC connection, internal distribution or an independent supply. ARSE’s May 2024 compilation includes the network code and distribution rules; applicable project requirements should be confirmed with the relevant parties. ISO’s directory identifies ANMC as the national standards body. For motor feeders, request load data, starting characteristics and protection requirements. For pumping stations, add operating cycles, controls and restart conditions. These inputs establish a clear technical basis for comparing proposals and reviewing the final arrangement with the project team.

[1][2]

Organise your technical dossier

Applications to assess

Possible applications, not completed T Afrik project references.

Frequently asked questions

Which MV levels are documented for NIGELEC?

ARSE’s May 2024 compilation describes mainly 20 and 33 kV phase-to-phase. Confirm actual voltage and protection requirements for the connection.

Can a route from Lomé be assessed?

The World Bank documents the Lomé–Ouagadougou–Niamey corridor in May 2025. The route, transit conditions and final journey must be checked for each shipment.

Sources and verification scope

Sources checked on 9 October 2026

  1. ARSE Niger — Recueil des textes du secteur de l’énergie, mai 2024
  2. Banque mondiale — Corridor économique Lomé–Ouagadougou–Niamey, mai 2025
  3. ISO — Annuaire des organismes nationaux de normalisation
Explore the regional context

Agree shipment responsibilities

Specify weights, dimensions, port, final site, lifting and origin/transport documents. Packing, service and timing depend on the shipment. An Incoterm needs its named place and version; FCA or DAP are options to agree, not universal terms. Check ISPM 15 for regulated raw wood packaging.

[1][2]

Prepare procurement and logistics

Selecting equipment for your next project?

Tell us about your application, site and technical constraints to prepare a useful equipment consultation.

Request a quotation