West Africa

Electrical equipment — Mali

For an industrial project in Mali, equipment selection starts with the installation’s power requirements and the final route to site. T Afrik Energy supports MV/LV equipment enquiries. The applications below illustrate possible uses and do not represent completed projects.

Illustrative outdoor substation with a distribution transformer
Representative photograph · T Afrik Energy Solutions

Documented voltage levels

15 / 30 kV

Network counterpart

EDM-SA — Énergie du Mali

Networks and equipment class selection

The World Bank’s March 2019 MESIP document describes EDM-SA networks at 15 and 30 kV in Bamako. These documented levels provide a starting point; the actual feeder and supply substation must be checked. An industrial connection, a peripheral extension or an independent installation may require a different arrangement. Before selecting an RMU, transformer or MV cable, establish the delivery voltage, required power, fault levels and protection scheme. Temperature, dust exposure and maintenance access also influence equipment specifications.

[1]

Network voltage and equipment rating are different

The reference catalogue includes AIS and RMU classes 12, 24 and 36 kV, and AIS up to 40.5 kV. For nominal 30 or 33 kV networks, examine the 36 kV option against maximum voltage, insulation, current and fault constraints. A 24 kV class does not cover a nominal 30 kV network; 36 kV does not cover 66 kV. Cable U0/U/Um markings require separate validation.

Equipment

Ports, transit and the final site route

Mali is landlocked, so an equipment shipment needs both transit planning and a road route to the receiving site. Mali Customs identifies the Dakar–Bamako corridor in its November 2025 communication. This route can be assessed for a shipment, with crossing conditions checked when the offer is prepared. For a transformer or compact substation, specify transport dimensions, weight, the receiving location and available unloading equipment. Delivery in Bamako and delivery to a more remote installation require different assessments of the final road journey.

[1]

Equipment to examine for your project

Configurations are adapted from the Imperium catalogue verified for this version. Confirm the actual reference, documents and availability in the offer; local approval is not automatic.

Consultation requirements and documents

A Mali enquiry should state whether the equipment will connect to EDM-SA or form part of a private installation. The owner and design consultant can then request appropriate protection data, connection drawings and tests. ISO identifies AMANORM as the national standards body; applicable requirements should be checked against the project specification and with the relevant parties. For a remote site, also define spares, available maintenance skills and any generator integration. The technical proposal must be reviewed and accepted within the project’s own approval process.

[1]

Organise your technical dossier

Applications to assess

Possible applications, not completed T Afrik project references.

Frequently asked questions

Which MV voltage should a Mali project use?

MESIP sources document 15 and 30 kV in Bamako. Confirm the delivery voltage and network data with the connection authority before final equipment selection.

What information is needed for delivery to a Mali site?

Provide the final location, equipment weight and transport dimensions, vehicle access and lifting arrangements. The route and transit conditions need to be assessed with the carrier for that shipment.

Sources and verification scope

Sources checked on 9 October 2026

  1. Banque mondiale — Mali Electricity Sector Improvement Project, mars 2019
  2. Douanes du Mali — Intégration numérique des corridors, novembre 2025
  3. ISO — Annuaire des organismes nationaux de normalisation
Explore the regional context

Agree shipment responsibilities

Specify weights, dimensions, port, final site, lifting and origin/transport documents. Packing, service and timing depend on the shipment. An Incoterm needs its named place and version; FCA or DAP are options to agree, not universal terms. Check ISPM 15 for regulated raw wood packaging.

[1][2]

Prepare procurement and logistics

Selecting equipment for your next project?

Tell us about your application, site and technical constraints to prepare a useful equipment consultation.

Request a quotation