Central Africa

Electrical equipment — Cameroon

An electrical enquiry in Cameroon may serve food processing, logistics or an industrial building near a port. Port Authority of Kribi documents describe industrial-development proposals and a cocoa-processing context. Equipment selection should follow the actual activity and available connection. MV switchgear, transformers, cables and LV boards can then be arranged around workshop loads, auxiliary services and functions that need to remain powered when the main supply is interrupted.

Illustrative outdoor substation with a distribution transformer
Representative photograph · T Afrik Energy Solutions

Documented voltage levels

15 / 30 kV

Network counterpart

Eneo Cameroon

Networks and equipment class selection

ARSEL’s September 2025 energy-balance document identifies several voltage interfaces, including 90/15 kV at Maroua and 90/30 kV at Guider; the Kribi point is listed at 225/30 kV. These establish 15 and 30 kV levels in specific configurations, rather than a free choice for every site. The project’s Eneo connection information must confirm the available feeder, protection characteristics and operating voltage before selecting switchgear or transformer ratio.

[1]

Network voltage and equipment rating are different

The reference catalogue includes AIS and RMU classes 12, 24 and 36 kV, and AIS up to 40.5 kV. For nominal 30 or 33 kV networks, examine the 36 kV option against maximum voltage, insulation, current and fault constraints. A 24 kV class does not cover a nominal 30 kV network; 36 kV does not cover 66 kV. Cable U0/U/Um markings require separate validation.

Equipment

Ports, transit and the final site route

Distinguish Douala, the starting point of the documented corridor to Chad, from Kribi’s port logistics and industrial-development context. Kribi’s announced 1,200-hectare zone is planned for gradual operation from 2027; that schedule does not establish current availability for a project. For an electrical-equipment shipment, the preferred port depends on the final destination, handling requirements and inland route to the actual building or workshop receiving the equipment.

[1][2]

Equipment to examine for your project

Configurations are adapted from the Imperium catalogue verified for this version. Confirm the actual reference, documents and availability in the offer; local approval is not automatic.

Illustrative lineup of air-insulated medium-voltage switchgear
· T Afrik Energy Solutions

Documented range

Air-insulated MV switchgear

Incomers, feeders and transformer protection: define board functions and configuration.

Published rated voltages: 12 / 24 / 36 / 40.5 kV.

Consultation requirements and documents

Eneo’s professional-customer page requests customer identity, address and desired capacity, and states that a detailed quotation follows a site visit. Site information therefore forms the basis of the connection process. Provide the Eneo specifications received, the single-line diagram and load data when requesting switchgear or transformers. A Kribi port building and an installation served by another feeder require their respective electrical interfaces and operating requirements to be established.

[1][2]

Organise your technical dossier

Applications to assess

Possible applications, not completed T Afrik project references.

Cocoa-processing project in Kribi’s industrial setting: workshop, motor and auxiliary distribution with identified production circuits.

IndustriesServices

Port warehouse or technical building: MV/LV transformation and boards for handling equipment, lighting and logistics services.

IndustriesServices

Northern Cameroon connection: switchgear and cables matched to the confirmed feeder, distinguishing the configurations documented at Maroua and Guider.

IndustriesServices

Frequently asked questions

Can Maroua and Guider use the same electrical configuration?

The cited ARSEL report records different interfaces, including 15 kV at Maroua and 30 kV at Guider. Customer equipment depends on Eneo’s proposed feeder and connection specifications.

Is Kribi’s announced industrial zone immediately available for every project?

The port-authority page plans gradual operation from 2027. Confirm the project location, available services and connection at its actual development stage.

Sources and verification scope

Sources checked on 9 October 2026

  1. ARSEL — Validation du bilan énergétique, septembre 2025
  2. Eneo — Professional customer subscription and connection
  3. Port Authority of Kribi — Port Industrial Zone
  4. Port Authority of Kribi — Industrial-zone implementation
  5. World Bank — Cameroon–Chad Transport Corridor project appraisal
Explore the regional context

Agree shipment responsibilities

Specify weights, dimensions, port, final site, lifting and origin/transport documents. Packing, service and timing depend on the shipment. An Incoterm needs its named place and version; FCA or DAP are options to agree, not universal terms. Check ISPM 15 for regulated raw wood packaging.

[1][2]

Prepare procurement and logistics

Selecting equipment for your next project?

Tell us about your application, site and technical constraints to prepare a useful equipment consultation.

Request a quotation